BWT Bestprotect water filter set

0 Reviews
Immediately ready for shipment
Art.-Nr. GC-BWT-001

Price range: 126,00 € through 254,00 € incl. VAT

Product details

I regularly receive machines that are completely clogged with limescale. These machines were run with water from table water filters or with descaling pads in the tank – in the belief that this was doing the machine some good. Unfortunately, this isn't enough. Table water filters or descaling pads can only reduce the water hardness to the required level for a short time.

Personally, I would advise against these methods and instead recommend either using suitable bottled water or a water filter for your water supply. There are two options here:

  1. Direct connection to the machine – If the machine is connected to the mains water supply, the water filter can be installed directly in front of it.
    (Corresponding fixed water kits for the Linea Micra, Linea Mini, Linea Mini R and GS3 (AV and MP) are also available in the shop.)
  2. Installation in the cold water area of the faucet – In this case, the water is already filtered when cold water is drawn.

This ensures more reliable water quality and prevents excessive calcification of the machine.

BWT bestprotect is a water filter solution with special properties. It not only prevents the formation of limescale and gypsum, but also ensures a consistently high pH value.

BWT bestprotect thus protects valuable machine technology from deposits and prevents corrosion problems on stainless steel parts. This filter system also delivers water of high sensory quality for the production of high-quality hot beverages.

Technical advantages of BWT bestprotect at a glance:

  • 5-fold filtration
  • Reliable limescale and gypsum protection for machines
  • High pH value to minimize corrosion risks
  • Activated carbon fleece for consistently crystal-clear water
  • Easy handling when changing the filter

Scope of delivery:

  • BWT filter head (with 3/8 inch connection)
  • BWT filter cartridge
  • selected accessories

Note: Flexible hoses are not included. To connect the filter to the water supply, a 3/8-inch flexible hose of the appropriate length is required (available at hardware stores). The faucet or espresso machine can be connected directly to the filter's 3/8-inch outlet.

Manufacturer information
Manufacturer: BWT Wassertechnik GmbH
Address: Industriestraße 7, 69198 Schriesheim, Germany
Contact: +49 6203 73-0 | www.bwt.com

Safety information for water-carrying components

This spare part carries water, sometimes hot and under pressure. With a little experience in handling tools, you can usually install it yourself without difficulty.

For legal reasons I must nevertheless point out the following: before installation, switch the machine off, pull the mains plug and let it cool down. Release any remaining pressure, for example via the steam wand. If the machine is plumbed in, turn off the water. After installation, check all connections for leaks and do not leave the machine unattended during the first few uses. Leaking connections can lead to water damage.

I accept no liability for damage caused by improper installation or leaking connections. Your statutory warranty rights remain unaffected.

For a plumbed-in connection, I also recommend a water stop (Aquastop) in the supply line. It shuts off the water supply should a connection ever start to leak.

Additional information

filter head

BWT besthead, BWT besthead FLEX

filter cartridge

BWT bestprotect V

BWT Aquameter

Yes No

Reviews (0)

Customers Reviews

Reviews can only be submitted by customers who bought the product in my shop. I check this against the order.

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: GC-BWT-001
Brand:
Back to Top
Product has been added to your cart