BWT besthead FLOW

The BWT besthead FLOW is the filter head with a built-in Aquameter for all filter cartridges from BWT water+more, for example BWT bestprotect and BWT bestmax. It connects the filter cartridge to the water line of your plumbed-in espresso machine and at the same time shows you how much capacity your filter cartridge has left.

The display shows the current remaining capacity, the days left until the next filter change, the starting capacity and the current flow rate in litres per hour. An LED also shows the status: blue confirms your settings, red indicates that the end capacity has been reached and the filter cartridge should be replaced. Operation works the same way as on the BWT Aquameter. A short press of the button switches between the displays, holding it for 3 seconds resets the counter after a cartridge change.

Compared to the BWT besthead FLEX , the FLOW does not need a separate Aquameter, because the water meter is already built into the filter head. This saves space under the counter and one connection point.

The filter head can be installed upright or horizontally. The connections can be aligned in 30° steps, so 90° elbows work well even in tight installation spaces. The FLOW is powered by a CR2032 coin cell (3 V), and the battery compartment opens without tools.

Technical data:
Maximum flow rate: 120 l/h
Inlet pressure: 2 – 8 bar
Water temperature: 4 – 30 °C
Ambient temperature: 4 – 40 °C
Dimensions (W x H x D): 130 x 105 x 115 mm
Battery: CR2032, 3 V
Installation: upright or horizontal

Scope of delivery:

– 1 x BWT besthead FLOW filter head with integrated Aquameter and 2 FLEX 90° elbow connectors, 3/8″ male thread

Manufacturer information
Manufacturer: BWT Holding GmbH
Address: Walter-Simmer-Straße 4, 5310 Mondsee, Austria
Contact: www.bwt-wam.com