PVC hose water tank Linea Mini (R), Linea Micra, GS3

Over time, the PVC hose that leads from the water tank to the pump may turn green, black or brownish.
In this case, the hose can easily be replaced yourself.
1 meter of PVC hose made in Germany is always supplied, so this kit fits the following machines: Linea Mini, Linea Mini R, Linea Micra, GS3, Strada 1GR

To stop the hose from slipping off, it is secured with the retaining clip F.3.009 – depending on the machine, on the pump connector, on the intake piece in the water tank, or at both points. On the Linea Mini R the intake piece is the intake T.3.014; on the Linea Micra it is part of the water tank kit 1063. When you replace the hose, it is worth checking the clips and the intake piece at the same time.

Fitting tip: A new hose is quite smooth on the outside and easily slips through your fingers. With a piece of kitchen paper you can grip it much better and push it onto the connector. You do not need pliers for this, as they can damage the soft hose.

This hose is an alternative to the original La Marzocco hose T.3.003. According to the spare parts diagrams, La Marzocco uses the T.3.003 in these machines: Linea Micra, Linea Mini, Linea Mini R and GS3.

Scope of delivery:
1 m PVC hose for the water tank

Manufacturer information
Manufacturer: REHAU Industrial Solutions SE & Co. KG
Address: Rheniumhaus, Helmut-Wagner-Straße 1, 95111 Rehau, Germany
Contact: Communication_Industrial_Solutions@rehau.com | industrial.rehau.com