La Marzocco Linea Mini R plumbing kit (1050)

With this original La Marzocco plumb-in kit, you connect your Linea Mini R directly to the water supply and the drain. The machine then draws its water straight from the mains, and the drip tray drains into the waste water through a hose. So you no longer need to refill the water tank or empty the drip tray.

The kit is intended for the Linea Mini R, the new version of the Linea Mini. You can recognise it by the display in the front panel and by “MI” in front of the serial number on the type plate.

Scope of delivery:

• 2 m drain hose
• Connection set for the drip tray
• 1.5 m water supply hose
• Check valve and fittings for the connection at the pump
• Copper pipe for the water path inside the machine

For the connection you need a water connection with a shut-off valve and a drain near the machine. A pressure reducer is usually not required. If your water pressure is very high, I can offer you a pressure reducer from BWT – just get in touch.

Water filter: Whether a water filter is needed in front of the machine depends on the hardness of your water. In regions with soft water one is often not necessary. With hard water I recommend a filter so that as little limescale as possible builds up in the machine, for example the BWT Bestprotect water filter set. You can find out your water hardness from your local water supplier.

If you later want to run the machine with the water tank again, the kit can be removed.

Installation: Installation should be carried out by someone with experience on espresso machines. I am happy to install the kit in my workshop in 82538 Geretsried by appointment.

Article number: 1050