La Marzocco Heating Element W1000 V110 Triang. FL (E.6.001.03)

0 Reviews
Ordered for you, usually ready to ship within a few working days
Art.-Nr. E.6.001.03

113,29 € incl. VAT

Product details

Original La Marzocco Heating Element W1000 V110 Triang. FL, suitable for the La Marzocco Linea Mini, Linea Mini R and GS3.

This heating element is designed for 110 V mains, as commonly used in the USA and Canada, for example. It is not suitable for the 230 V mains in Germany and Europe.

How to tell if the heater is defective

Before taking any measurement, unplug the machine, let it cool down and disconnect the cables from the heater. Measure with a multimeter directly at the two terminals (poles) of the heater.

An intact heater has a resistance of approx. 12.1 ohms between the two poles and no continuity to the housing.

A defective heater shows one of these two faults:

  • There is no continuity between the two poles. The heating coil is broken and the heater no longer heats.
  • There is continuity from one of the two poles to the heater housing. The heater then has a short to ground, which can trip the residual current circuit breaker (RCD).

Scope of delivery:
1 x La Marzocco Heating Element W1000 V110 Triang. FL

Item number: E.6.001.03

Manufacturer information
Manufacturer: La Marzocco Srl
Address: Via La Torre 14/H, 50038 Scarperia e San Piero (FI), Italy
Contact: info@lamarzocco.com | www.lamarzocco.com

Safety information for electrical components

This spare part runs on mains voltage (230 V or 110 V). With some manual skill you can easily fit the part yourself – usually you only need to plug on the connectors or flat push-on terminals.

Because this is an electrical component, I am nevertheless legally required to point out the following: work on electrical appliances should be carried out by competent persons. Before installation, switch the machine off, pull the mains plug and let it cool down. Make sure that all plug connections are secure and correctly assigned. Faulty connections can lead to damage to the machine, fire or electric shock.

I accept no liability for damage caused by improper installation, incorrect connection or modifications to the part. Your statutory warranty rights remain unaffected.

Safety information for water-carrying components

This spare part carries water, sometimes hot and under pressure. With a little experience in handling tools, you can usually install it yourself without difficulty.

For legal reasons I must nevertheless point out the following: before installation, switch the machine off, pull the mains plug and let it cool down. Release any remaining pressure, for example via the steam wand. If the machine is plumbed in, turn off the water. After installation, check all connections for leaks and do not leave the machine unattended during the first few uses. Leaking connections can lead to water damage.

I accept no liability for damage caused by improper installation or leaking connections. Your statutory warranty rights remain unaffected.

exploded view

This item is highlighted in the drawing. You can add further parts to your cart right here.

Linea Mini · 33 – Steam Boiler Assembly Item 6 All drawings for the Linea Mini →
Loading drawing…
Loading parts…

Reviews (0)

Customers Reviews

Reviews can only be submitted by customers who bought the product in my shop. I check this against the order.

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: E.6.001.03
Brand:
Back to Top
Product has been added to your cart